Hello world!

STEPPERONLINE CNC Digital Stepper Motor Driver 2.4-7.2A 18-80VAC or 36-110VDC for Nema 34 and 42 Motor

STEPPERONLINE CNC Digital Stepper Motor Driver 2.4-7.2A 18-80VAC or 36-110VDC for Nema 34 and 42 Motor: Industrial & Scientific. STEPPERONLINE CNC Digital Stepper Motor Driver 2.4-7.2A 18-80VAC or 36-110VDC for Nema 34 and 42 Motor: Industrial & Scientific. Top-level Quality, Affordable Price 。 Professional Driver, Manufactured by Leadshine 。 Suit for Nema 34 and 42 Stepper Motor 。 2.4~7.20A, 18-80VAC or 36-110VDC, 1/256 Microstep Resolution 。 Ideal solution for applications that require low-speed smoothness 。 The DM860T is brand and manufactured by Leadshine(The most famous stepper driver company in China).。 Overview:。 It is a fully digital stepper drive developed with advanced DSP control algorithm based on the latest motion control technology. 。 Compared with traditional analog drives, DM860T can drive a stepper motor at much lower noise, lower heating, and smoother movement. 。 。 Key Features: 。 * Input voltage 8-80VAC or 36-VDC。 * Anti-Resonance provides optimal torque and nulls mid-range instability。 * Motor auto-identification and parameter auto-configuration when power on, offer optimal responses with different motors。 * Multi-Stepping allows a low resolution step input to produce a higher microstep output, thus offers smoother motor movement。 * 6 selectable microstep resolutions including 00 to 200。 * Soft-start with no “jump” when powered on。 * 8 selectable peak current including 2.0A to 7.20A。 * Pulse input frequency up to 200 KHz, TTL compatible and optically isolated input。 * Automatic idle-current reduction。 * Suitable for 2-phase and -phase motors。 * Support PUL/DIR mode and CW/CCW mode。 * Over-voltage and over-current protections。 。 Electrical Specifications: 。 。 * Output Peak Current: 2.~7.2A (6.0 RMS)。 * Input Voltage: +8~80VAC (Typical 70VAC) or +36~VDC(Typical 80VDC)。 * Logic Signal Current: 7~6mA (Typical mA)。 * Pulse Input Frequency: 0~200kHz。 * Pulse Width: 2.μS。 * Isolation Resistance: 0MΩ。 * Cooling: Natural Cooling or Forced cooling。 * Environment: Avoid dust, oil fog and corrosive gases。 * Operating Temperature: -℃ - ℃ 。 * Vibration: -Hz / 0.mm。 * Weight: Approx.80g (20.oz)。 。 Packing List: 。 。 x Digital Stepper Driver DM860T 。 x Full DM860T Driver Manual 。 。 。

STEPPERONLINE CNC Digital Stepper Motor Driver 2.4-7.2A 18-80VAC or 36-110VDC for Nema 34 and 42 Motor
STEPPERONLINE CNC Digital Stepper Motor Driver 2.4-7.2A 18-80VAC or 36-110VDC for Nema 34 and 42 Motor
STEPPERONLINE CNC Digital Stepper Motor Driver 2.4-7.2A 18-80VAC or 36-110VDC for Nema 34 and 42 Motor
STEPPERONLINE CNC Digital Stepper Motor Driver 2.4-7.2A 18-80VAC or 36-110VDC for Nema 34 and 42 Motor
STEPPERONLINE CNC Digital Stepper Motor Driver 2.4-7.2A 18-80VAC or 36-110VDC for Nema 34 and 42 Motor
STEPPERONLINE CNC Digital Stepper Motor Driver 2.4-7.2A 18-80VAC or 36-110VDC for Nema 34 and 42 Motor